CBWCP - 054069 (II), PLY-TILE 530 GLOSS AND SEMI- (SUPP DATA)

  • MSDS: CBWCP
  • Manufacturer: M A BRUDER AND SONS INC
  • Product Name: 054069 (II), PLY-TILE 530 GLOSS AND SEMI- (SUPP DATA)
  • National Stock Number: 8010-00N065882
Product Identification

Product ID:054069 (II), PLY-TILE 530 GLOSS AND SEMI- (SUPP DATA)
MSDS Date:02/15/1993
FSC:8010
NIIN:00N065882
Kit Part:Y
MSDS Number: CBWCP

Responsible Party
M A BRUDER & SONS INC
600 REED RD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100; 215-359-3635

Info Phone: 215-353-5100; 215-359-3635

Cage: 85519

Contractor
M A BRUDER & SONS INC
600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

Ingredients

EPOXY RESIN

CAS: 25085-99-8

Fraction By Weight: 31-60%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION:IRRITATION OF RESPIRATORY
TRACT. PROLONGED INHALATION MAY LEAD TO MUCOUS MEMBRANE IRRITATION,
DROWSINESS, &/OR LIGHT-HEADEDNESS, HEADACHE, NAUSEA. SKIN
CONTACT:IRRITANT. PROLONGED OR REPEAT ED CONTACT CAN CAUSE
DERMATITIS. EYE CONTACT:IRRITANT. PROLONGED OR REPEATED CONTACT CAN
CREATE BLURRED(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLT HAZ:VISION, CORNEAL INJURY.
INGESTION:AMOUNTS INGESTED INCIDENTAL TO CONSUMER & INDUSTRIAL
HANDLING ARE NOT LIKELY TO CAUSE INJURY; HOWEVER, INGESTION OF
LARGER AMOUNTS COULD CAUSE SERIOUS INJURY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. RESTORE & SUPPORT CONTINUED BRTHG.
HAVE TRAINED PERSON GIVE OXYGEN IF NEC. GET EMERGENCY MED ATTN.
SKIN:WASH OFF QUICKLY W/PLENTY OF WATER, THEN SOAP & WATER; REMOVE
CONTAM CLTHG. WASH CONTAM CLTHG BEFORE REUSE. EYE:FLUSH IMMED W/LG
AMTS OF WATER, ESP UNDER LIDS, FOR AT LST 15 MINS. OBTAIN EMERGENCY
MED TREATMENT. INGEST:OBTAIN MED TREATMENT IMMED.

Fire Fighting

Flash Point:NON FLAMMABLE
Extinguishing Media:DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . NON-FLAMMABLE. WATER MAY BE USED TO COOL & PROTECT
EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST WHEN EXPOSED
TO EXTREME HEAT OR FIRE.

Accidental Release

Spill Release Procedures:COLLECT IN CONTAINER FOR DISPOSAL, ACCORDING
TO HEALTH & ENVIRONMENTAL REGULATIONS. CLEAN UP W/WATER BEFORE
ALLOWING TO DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 100F. KEEP FROM FREEZING.
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:CONTROL ENVIRONMENTAL CONCENTRATIONS BELOW
APPLICABLE STANDARDS. WHERE RESPIRATORY PROTECTION IS REQUIRED, USE
ONLY NIOSH/MSHA APPROVED RESPIRATORS I/A/W OSHA STANDARD 29 CFR
1910.134.
Ventilation:MAINTAIN ADEQUATE VENTILATION TO ENSURE AIR ENTRY DURING
APPLICATION & DRYING TO PREVENT BUILD-UP OF VAPORS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . SKIN CREAM (IF NEEDED).
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:GLOSS WATER REDUCIBLE EPOXY (054 LINE OR 051
LINE), PART B.

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Spec Gravity:1.08-1.1
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:48-50

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, AMINES.
Stability Condition to Avoid:ELEVATED TEMPERATURES. CONTACT W/OXIDIZING
AGENTS.
Hazardous Decomposition Products:IF INVOLVED IN FIRE (FROM OTHER
SOURCES) COULD CONCEIVABLY RESULT IN RELEASE OF CARBON DIOXIDE &
CARBON MONOXIDE.

Disposal

Waste Disposal Methods:DISPOSE I/A/W LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.